31 replies to this topic

[92acclude]

Alright. FW Battlefortress: length: 9.5" (237mm)(minus exhaust, including deathrolla) width: 5" (128mm) height: 5" (128mm) track width: .9375" (23mm) width of driver compartment: 2.125" (54mm) FW Mega/Meka Dread: (all approx and will vary depending on pose) height: 4.5" (115mm) tall width: 5.75" (150mm)(including arms) shoulder-to-shoulder width: 3.5'" (85mm) depth: 2.5" (60mm) front to back (ignoring arms) FW fighta-bomma (I believe the fighta is smaller) fuselage: 8.5" (215mm) long x 1.25" (32mm) wide x 2.375" (57mm) tall (tallest) 1.375" (37mm) tall (shortest) wingspan: 11" (275mm) wing width:2.5" (60mm) at fuselage — 1.5" (37mm) at wing tip tail span: 6.5' (161mm) FW Killbursta (including ram) length: 9.5" (237mm) width: 4.5" (112mm) height: 4" (102mm) diameter of barrel: .875" (23mm) bore of gun: .5" (13mm) length of barrel: 1.75" (44mm) (measured from mantlet to muzzle) width of mantlet: 1.625" (41mm) track width: .8125: (21mm) diameter of front wheel: 1.1875" (31mm) Let me know if you guys need anything else.

[Harkon Greywolf]

Really, has no-one got and measured a Chinork yet?

[Gorzagh]

Hey, does anyone have dimensions for Big Guns?

[Big_Mek_Boomsprocket]

We really need gorko/morkonaught dimensions. Also, I'm kind of suprised that no conversion/scratchbuilding projects are going on for them.

[Mazgruk]

Meka/Megadread

 

6" wide (1 gun & 1 CC weapon)

5" tall (top of exhaust) 5 1/2" for the mekadread (top of exhaust)

2 6/8" long (body + back engine)

[urluck]

We really need gorko/morkonaught dimensions. Also, I'm kind of suprised that no conversion/scratchbuilding projects are going on for them.

 

 

I would be intensely interested in 'orkanuat dimensions. I'm trying to eyeball it based on photos, but all I've got so far is "half a stompa".

[Magus Gar Kan]

While not an ork specific model, I figured I'd pass this along to everyone that likes their kitbashed or homemade buildings to size match the GW ones.

I got a chance to look at a Void Shield Generator still in box and was able to take some rough measurements:

The base, from 'toe' to 'toe' is 5" square, with the inner edge being 3 1/2" wide.

The top of the base is 3" square and the base sits at 2 1/2" tall without the gears.

The gears are 1/8" thick and are roughly 2 1/2" in diameter.

The pillars are 6 1/2" inches tall, with a 1/8" thick platform sitting on the 3 1/2" mark.

Fully assembled the building would roughly 9 1/2" tall at the Tesla Orbs, with battlements at 2 1/2" and 6".

This means that to create your own, you would need to make a building that would, on average, sit on a 4" base, with a 3" square tower and overall, stand 6 1/2" in height.

[Drakon7]

Any chance to get the dimensions on the Blasta-bomma? 

I can also measure the morkanaut tomorrow for you guys.

[Niiru]

This is a useful thread, shouldnt it be pinned? lol

[Orkimedez]

Big squiggoth is 6" long, 3.5" wide and 4.5" tall.

[gomcse]

Hey guys, I know that this is an old thread, but I have an answer for the Morkanaut dimensions:


Dimensions for the Morkanaut are 13cm tall from base to top of armor (not including the kustom force field or the junk on top.)

15.5 cm wide from outside of gun arm to edge of klaw arm.

The hull portion is only about 6cm (depth, front to back).

It is 12 cm from back to the tip of its "stomach," excluding the exhaust piece at the top of its back.

[Badfang Brassaxe]

Hey guys, I know that this is an old thread, but I have an answer for the Morkanaut dimensions:

It's a pretty good thread to pin to your bookmarks bar if you do much kustom building - just a pity that the Meks has got so much already pinned to the top of it