IPB



Welcome Guest ( Log In | Register )

3 Pages V  < 1 2 3  
Reply to this topicStart new topic
> Trying and Discussing the New Paints, ...this is the thread for it!
Dadgad
post May 21 2012, 09:06 AM
Post #41


Hair Squig


Group: Grotz
Posts: 70
Joined: 13-June 08
Member No.: 7,561



I thought I'd put up this picture of an Ork Nob I've just done using some of the new (and some old) washes. Apart from the dwarf bronze bits on the bullets and the cables on the power claw this was all done with washes, over a white base coat.

First, the browns. I always liked the finish of devlan mud which is what I've used for the trousers. There's 2-3 coats of that plus a final coat of 50:50 devlan mud and badab black. By comparison the new brown, Agrax Earthshade, is rather lighter - you can see it in the chest jerkin.

The other metals are done by adding tiny amounts(about 1:10) of mithril silver or chainmail to 50:50 Drakenhof Nightshade and badab black. A couple of coats gives a good cover, and I've finished it with a badab black wash. I've used a wash of 1 part dwarf bronze with 4-5 parts Bloodletter red to get the red bits on the shoulder pads and a similar mix but with casandora yellow to do the crosspiece on the bosspole. The middle teeth are casandora yellow over the light metal wash mentioned above.

The skin is undercoated white, then a wash of athonian camoshade, then a wash and touch-up with biel tan green - for a wash the latter covers really well. The skull on the bosspole is just athonian camoshade over the white base coat - its a bit over-exposed in the pic but to me gives a good rotting green 'corpse' colour. Should be popular for all the chaos guys!

The bright bits - the arm band is straight casandora yellow and the glove is straight Bloodletter red as are the eyes and mouth. The latter pools nicely around the edges to give eyes with 'built-in white bits' - not apparent in the RHS here but clear on the other eye (to our left the ork's right). The tongue is 50:50 Bloodletter red and Drakenhof Nightshade.

Finally, there are several layers of Badab black over the white base coat to get the grey of the bullet holder belt, and several layers of Devlan Mud and Badab Black (gradually darkening) to do the boots. Now, I just need to get my pin drill working and drill out the gun barrels.
Attached File(s)
Attached File  IMG_4026.jpg ( 1.5MB ) Number of downloads: 17
 
Go to the top of the page
 
+Quote Post
mr_maxime
post May 21 2012, 03:39 PM
Post #42


'Ard Boy
Group Icon

Group: Freebooterz
Posts: 864
Joined: 14-June 05
From: Acworth, GA, USA
Member No.: 1,457



I tried the blue glaze over the skin of my blue orks but dont see much difference. I tried it over plain white primer and it works pretty damn well at tinting the area blue however.


--------------------
here's why my orks are blue. they have an intense hatred of historical recording of any kind which results in none of them knowing why they're blue. because of this, anytime anyone questions the origin of their skintone they waste no time adding the inquirer's head to their bosspole. no one will ever know why these orks are blue, as merely asking about it is a death wish. in the end there will be only 3 types of people left, the blue orks, those who don't want to know the history of the blue skin, and the dead.
Go to the top of the page
 
+Quote Post
da kale
post May 25 2012, 01:16 AM
Post #43


Yoof


Group: Boyz
Posts: 221
Joined: 26-October 07
From: bris australia
Member No.: 5,370



I have had a few tries with the new paints. All in all I think they work well, but there are something's that I am having trouble with. Firstly the glazes seem to make the skin of my orks look very shiny. Has any one found a way to use the glazes with out the shine?

I also got a pot of imperial primer that should be used as an undercoat (or so I thought) which is so watery that it doesn't really cover anything exsept the deep parts. Am I using it wrong?

Any help that the painting guys could help with would be appreciated. I am working from an iPad at the moment and my computer has given up the ghost, so if any one can tell me how to put photos up from the iPad or iPhone I could put up a few pics of what is happening.

Cheers
Kale
Go to the top of the page
 
+Quote Post
Agatheron
post May 25 2012, 07:45 PM
Post #44


Blue Thunda Ace
Group Icon

Group: Nobz
Posts: 6,315
Joined: 6-July 03
From: Calgary, Alberta, Canada
Member No.: 32



Try applying the glazes a bit thinner, but either way usually the models need a clear coat regardless of what you have on the model. A matte varnish, like dull cote will cut the shine drastically, even to the point of dulling down metallics... purity seal is more a satin varnish, which cuts the shiny, but leaves the metallics looking the way you want them to.

As for the Imperial Primer, I can't say for certain, but it is primarily intended to work directly over the plastic/metal/resin. I don't think it is intended to fully cover rather than giving a surface with some tooth that other paints can be applied over. Do you have Abaddon Black?


--------------------
______Agatheron \_______
--Remember, long, uncontrolled bursts,
and indiscriminate target selection.
____________________________/


http://chaplainsbrush.wordpress.com/
Go to the top of the page
 
+Quote Post
mr_maxime
post May 27 2012, 12:23 AM
Post #45


'Ard Boy
Group Icon

Group: Freebooterz
Posts: 864
Joined: 14-June 05
From: Acworth, GA, USA
Member No.: 1,457



I haven't tried imperial primer, but it may to thinner to make it easier to get the recesses a spray primer can easily miss.


--------------------
here's why my orks are blue. they have an intense hatred of historical recording of any kind which results in none of them knowing why they're blue. because of this, anytime anyone questions the origin of their skintone they waste no time adding the inquirer's head to their bosspole. no one will ever know why these orks are blue, as merely asking about it is a death wish. in the end there will be only 3 types of people left, the blue orks, those who don't want to know the history of the blue skin, and the dead.
Go to the top of the page
 
+Quote Post
mr_maxime
post May 28 2012, 11:16 PM
Post #46


'Ard Boy
Group Icon

Group: Freebooterz
Posts: 864
Joined: 14-June 05
From: Acworth, GA, USA
Member No.: 1,457



Glazes dry cloudy so don't use them on something you want to be clear, ie no tinting glass.


--------------------
here's why my orks are blue. they have an intense hatred of historical recording of any kind which results in none of them knowing why they're blue. because of this, anytime anyone questions the origin of their skintone they waste no time adding the inquirer's head to their bosspole. no one will ever know why these orks are blue, as merely asking about it is a death wish. in the end there will be only 3 types of people left, the blue orks, those who don't want to know the history of the blue skin, and the dead.
Go to the top of the page
 
+Quote Post

3 Pages V  < 1 2 3
Reply to this topicStart new topic

 



RSS Lo-Fi Version |  Time is now: 21st April 2014 - 05:30 AM